Best Tapo Camera Mounts: C660, C520WS, C425 & More

Finding the right Tapo camera mount takes more research than most security camera brands require. Unlike Wyze, which uses a near-universal 1/4″-20 thread across almost every model, Tapo cameras use proprietary bracket systems that vary by model group. A mount designed for the C310 will not fit the C420, and a C210 mount will not work on either.

TP-Link also does not offer a broad range of first-party replacement and specialty mounting accessories. The good news is that a useful ecosystem of third-party mounts has developed around the major Tapo camera families.

This guide covers the best mounting options for the Tapo cameras we review on HomeCamCafe, including indoor pan/tilt cameras, outdoor bullet cameras, outdoor pan/tilt models, battery cameras and solar kits.

Tapo Camera Mount Compatibility at a Glance

Best Mounts for the Tapo C210 and C200

The Tapo C210 and C200 use a proprietary twist-on base. The camera body locks into the included stand with a quarter-turn rotation, so standard 1/4″-20 mounts do not attach directly.

Because these cameras have been popular for several years, there is a good selection of third-party mounts built specifically around the twist-lock base.

The most useful upgrade for C210 owners is a corner mount. The included stand works well on a flat surface, but placing a pan/tilt camera in the corner of a room can dramatically improve coverage.

The Brainwavz corner mount for the Tapo C210 and C200 is purpose-built for that job. Its shelf design positions the camera directly in a room corner while leaving the pan/tilt mechanism free to move.

For baby monitoring, pet cameras and general living-room coverage, this is one of the most useful alternative mounts available for the C210.

Mounting the Tapo C120

The Tapo C120 uses a magnetic base system. The camera attaches magnetically to a metal wall plate that can be screwed or adhered to the mounting surface.

For permanent outdoor installation, I prefer screwing the plate directly to the surface rather than relying on adhesive, particularly where the mount will see temperature swings, wind or direct weather.

The C120 does not need much in the way of aftermarket hardware for ordinary flat-wall or soffit installation. Gutter mounting is one of the few situations where a third-party bracket may make installation substantially easier.

Best Mounts for the Tapo C310, C320WS and C325WB

The C310, C320WS and C325WB are wired outdoor bullet cameras with similar mounting needs. This group also has one of the stronger third-party mount selections in the Tapo lineup.

For gutter mounting without drilling, the OkeMeeo gutter mount for the Tapo C310, C320WS and C325WB is one of the better options.

It clips directly onto a gutter lip and allows the camera to be elevated above a garage or roofline without drilling into the siding or fascia.

Corner brackets are another useful option for this camera group. They allow the camera to sit at a wall junction and look diagonally across a driveway, porch or property line rather than straight away from one wall.

Best Mounts for the Tapo C500, C510W, C520WS and C530WS

The Tapo C500, C510W, C520WS and C530WS belong to Tapo’s outdoor pan/tilt family and use a mounting arrangement designed specifically for the larger rotating outdoor housing.

The included bracket handles normal wall and eave installations well. The camera can also be pole mounted with suitable loops or straps.

On the C500, the camera’s power cable needs to be routed through the opening in the rear of the bracket before the camera is fully secured. After the camera is positioned on the bracket, retaining screws hold the assembly together.

For gutter mounting, the Koroao gutter mount for Tapo outdoor pan/tilt cameras is designed for this camera family. The manufacturer lists compatibility with the C500, C510W, C520WS and C530WS, along with several related Tapo outdoor PTZ models.

The gutter bracket is useful when the ideal camera location is above a garage, driveway or side yard and you do not want to drill into siding or fascia. It clamps to the gutter and lets the camera sit higher than a typical wall installation, which can improve the overall viewing angle.

I especially like this option for the C500 because the camera itself is relatively lightweight. A no-drill gutter installation gives you a high mounting position while still making it easy to reposition the camera later.

Vinyl siding is another good match for this family. In our Tapo C500 review, we installed the camera using vinyl siding clips rather than drilling directly through the siding.

Best Mounts for the Tapo C400 and C400S

The Tapo C400 and C400S are wire-free outdoor cameras with broad third-party mount compatibility compared with some other Tapo families.

For gutter mounting without drilling, the Holicfun gutter mount clips onto the gutter lip and allows the camera angle to be adjusted without making permanent holes.

This is particularly useful for a battery camera because the camera may need to be removed periodically for charging or repositioning.

Best Mounts for the Tapo C420, C216 and C236

The C420, C216 and C236 use model-specific Tapo mounting hardware, and there are aftermarket mounts that cover several models across this family.

For gutter mounting, the Holicfun gutter mount for compatible Tapo cameras lists support for several Tapo models including the C420, C400, C236 and C216.

For corner installations, look for a mount that specifically lists your exact model. Tapo has enough different proprietary bracket patterns that visual similarity is not enough to guarantee compatibility.

Best Mounts for the Tapo C425

The Tapo C425 uses a magnetic base for normal installation, but it also provides additional mounting flexibility for situations where the magnetic plate is not ideal.

The magnetic system works particularly well with a battery camera because the camera can be removed quickly for charging.

For gutter mounting without drilling, the OkeMeeo gutter mount for the Tapo C425 is built around this camera’s form factor.

For a more permanent high wall installation, the MagitcSee anti-theft wall mount for the Tapo C425 provides a more secure mounting arrangement than relying on the magnetic plate alone.

Best Mounts for the Tapo C660 and C615F

The Tapo C660 KIT and C615F KIT both ship with solar panels and mounting hardware designed specifically for their camera-and-panel combinations.

For most installations, the included hardware works well. The main challenge is finding a position that gives the camera the correct field of view while also giving the solar panel enough direct sunlight.

The C615F adds another variable because the floodlight itself also needs to illuminate the desired area.

For homes with vinyl siding, the Koroao vinyl siding mount for Tapo solar kit cameras provides a no-drill option for compatible installations.

Purpose-built gutter mounts are also available for these solar kits and can be useful when the roofline provides better sun exposure than the wall.

Before committing to the installation, confirm that the solar panel location receives direct sunlight during the day. The panel can be angled separately from the camera, which gives you some flexibility in balancing camera aim and sun exposure.

General Tapo Mounting Tips

Use the paper mounting template included with the camera whenever one is supplied. It shows the correct spacing for the mounting holes and makes it much easier to drill accurately the first time.

For outdoor powered cameras, route the cable toward the wall or eave and secure it with cable clips. Do not leave the wire hanging where wind can repeatedly pull on the connector.

A clean cable route also reduces the chance of rainwater following the wire toward the power connection. Our security camera cable hiding guide covers outdoor cable management in more detail.

For battery cameras mounted high on gutters or soffits, think about charging access before choosing the location. A camera mounted 12 feet above the ground may provide a great view, but needing a ladder every time the battery needs charging gets old quickly.

In those situations, a compatible solar panel can be worth the additional cost.

Bottom Line

For more Tapo installation help see our Tapo C500 review and security camera cable hiding guide. For the full collection of Tapo reviews and guides see the Tapo camera hub.